1·It is an inlet channel.
这是进口通道。
2·This design is the main engine will take the step motor actuators provide an idle by-pass inlet channel.
本设计主要是将汽油机的带步进电机的怠速执行器提供一个旁通的进气通道。
3·The tail gas outlet nozzle should be tangential to allow gravity flow of the sulfur form the waste heat boiler to the inlet channel of the downstream sulfur condenser.
尾气出口喷嘴宜为正切向，从而使的来自余热锅炉硫的重力流流入下游硫冷凝器的入口通道。
4·The air inlet holes of the hand disc, the flanging of the wind guide cover and the flanging of the hand disc form an air inlet channel, resulting in a noise separating structure.
所述的手拉盘进气孔、导风罩上的翻边和手拉盘翻边形成进气通道，构成噪声阻隔结构。
5·Air enters the desiccator through an annular inlet channel, which is covered by a strip of Polytetrafluorethylene PTFE coated wire mesh to prevent the ingress of rain, dust, insects, etc.
空气进入干燥器之后需通过环形通道，环形通道采用聚四氟乙烯涂层，防止雨水、灰尘和昆虫等进入。
6·A borough of southern Wales west-northwest of Cardiff. It is an industrial port on Swansea Bay, an inlet of the Bristol Channel. Population, 188,500.
斯旺西威尔士南部市镇，位于卡迪夫西北偏西。是布里斯托尔海峡的小海湾斯旺西湾的一个工业港口。人口188,500。
7·The chamber has an inlet in flow communication with the channel and an outlet in flow communication with the plurality of fluid flow paths of the heat exchange tubes.
该腔具有一与该通道流体连通的入口和一与热交换管的多个流体流动通路流体连通的出口。
8·The result is that from inlet to outlet of the blade channel, Axial fan blade effected on air flow is a gradually changed process of energy transmitting.
结果表明，从叶道的进口到出口，轴流通风机叶片对气流的作用是一个渐变的能量传递过程。
9·The design experience of how to choose three key parameters: the width of thermal channel, the layout of inlet and outlet and the type of glass is discussed.
交流在热通道设计中如何合理选择热通道宽度、风口布置、玻璃种类三个关键性参数的设计经验。
10·Compensate for momentary surges in gas pressure with a restrictive orifice in inlet pressure channel on the models with pressure range of 1 to 26 in. wc (0.25 to 6.5 kPa).
为一时激增补偿与渠道，在入口压力与压力范围为1 ？二十六英寸厕所(0.25至6.5千帕)的模式限制口的气体压力。